(818) 886-3755 [email protected] Northridge, CA
AS9100DISO 9001:2015
Request a Quote (818) 886-3755
Quality Management System

Certified to
AS9100D
& ISO 9001

Thermometrics Corporation holds active dual certification to AS9100D (Rev D:2016) — the aerospace quality management standard — and ISO 9001:2015. Our quality management system governs every aspect of design, manufacturing, calibration, inspection, and shipment documentation.

AS9100D — Rev D:2016
Aviation, Space & Defense Quality Management System
ACTIVE
Standard
AS9100D:2016
Scope
Temperature Sensor Mfg.
Status
Currently Active
ISO 9001:2015
Quality Management System — General Industry
ACTIVE
Standard
ISO 9001:2015
Scope
All Products & Services
Status
Currently Active

Copies of current certificates available upon request — contact [email protected]

Quality Built Into Every Process

Our Quality Management System (QMS) is not a documentation exercise — it is the operational framework governing how every Thermometrics sensor is designed, manufactured, calibrated, inspected, and shipped. Implemented under AS9100D, our QMS exceeds ISO 9001 requirements by incorporating aerospace-specific controls for product safety, configuration management, and first article verification.

The QMS covers all departments: sales (order review, technical clarification), engineering (drawing control, change management), purchasing (approved supplier management, incoming inspection), manufacturing (process control, traveler documentation), quality (final inspection, calibration, nonconformance disposition), and shipping (preservation, packaging, documentation package).

All quality records are maintained per AS9100D clause 7.5, with controlled document management and retention schedules. Calibration records, material certifications, inspection data, and nonconformance records are traceable to specific job orders and serial numbers.

2012+
AS9100 Registration
Continuously certified since 2012
100%
Material Traceability
Heat lot records on all materials
NIST
Traceable Calibration
Unbroken measurement chain
0-day
Documentation Delay
All docs ship with hardware

AS9100D Requirements Beyond ISO 9001

AS9100D adds approximately 100 aerospace-specific requirements to the ISO 9001:2015 baseline. These additions directly govern how Thermometrics designs, documents, and delivers your temperature sensing assemblies.

AS9100D §8.3

Design & Development Control

Formal design review, verification, and validation processes for custom sensor configurations. Engineering change control with documented impact assessment before release to production.

AS9100D §8.4

Approved Supplier Management

Approved Supplier List (ASL) with supplier qualification, periodic re-evaluation, and performance monitoring. Raw material suppliers assessed and approved before use on aerospace deliverables.

AS9100D §8.5.2

Product Identification & Traceability

Unique identification maintained throughout production. Material heat/lot numbers recorded on job travelers and retained in quality records. Forward and backward traceability from raw material through finished assembly.

AS9100D §8.5.5

First Article Inspection (FAIR)

First Article Inspection per AS9102 required for new part numbers, engineering changes, and manufacturing changes. FAIR documents dimensional conformance, material conformance, and functional performance of the first production unit.

AS9100D §8.6

Product Release & Verification

Documented inspection and test completion required before product release. Certificate of Conformance issued by authorized quality personnel. No hardware ships without completed inspection records and COC.

AS9100D §8.7

Nonconformance Control

Formal nonconforming product identification, segregation, and disposition process. Material Review Board (MRB) disposition for use-as-is or repair decisions. Customer notification for flight-critical nonconformances per PO requirements.

NIST-Traceable Calibration Chain

All calibration equipment used by Thermometrics to test and verify temperature sensor performance is calibrated against NIST-traceable standards, maintaining an unbroken chain of traceability to the SI unit of temperature (kelvin) via the International Temperature Scale of 1990 (ITS-90).

Calibration certificates issued with our sensors include: actual measured values at specified temperature setpoints, the reference standard used with its calibration status, expanded measurement uncertainty at k=2 (95% confidence level), and the NIST traceability statement.

Calibration Services Request Cal Certificate
1
SI Unit — The Kelvin
Primary reference: the kelvin, defined by the Boltzmann constant. Realized through fixed thermometric points of the International Temperature Scale (ITS-90).
ITS-90 · BIPM
2
NIST Primary Standards
National Institute of Standards and Technology (NIST) maintains primary temperature standards including fixed-point cells, SPRTs, and primary noise thermometers referenced to ITS-90.
NIST · Gaithersburg, MD
3
Accredited Secondary Laboratory
NVLAP- or A2LA-accredited calibration laboratory calibrates working standards against NIST reference standards. Calibration certificates issued with NIST traceability statement.
NVLAP / A2LA ACCREDITED
4
Thermometrics Working Standards
Our reference RTDs and thermocouple calibrators are calibrated by accredited laboratories and maintained in controlled storage. Calibration status tracked per AS9100D §7.1.5.
AS9100D §7.1.5 COMPLIANT
5
Your Temperature Sensor
Customer sensors calibrated against our working standards. Calibration certificate issued with measured data, reference standard identification, uncertainty budget, and NIST traceability statement.
CERTIFICATE ISSUED WITH HARDWARE

What Documentation Ships With Your Order

Documentation requirements vary by order type and customer specification. The matrix below shows standard inclusions vs. items available on purchase order request. Specify documentation requirements on your RFQ or purchase order.

Document Standard Industrial Aerospace (AS9100D) Pharmaceutical / Validated Laboratory / Precision
Certificate of Conformance (COC) Standard Standard Standard Standard
Material Certifications (Heat/Lot) On Request Standard Standard On Request
Dimensional Inspection Records N/A Standard On Request N/A
NIST-Traceable Calibration Certificate On Request On Request Standard Standard
FAIR per AS9102 N/A On Request (new PN) N/A N/A
Acceptance Test Data (ATP) N/A On Request On Request N/A
Special Process Certifications N/A On Request On Request N/A
Uncertainty Budget (k=2) N/A With Cal Cert With Cal Cert Standard

✓ Standard = included with shipment at no additional charge. ◆ On Request = specify on purchase order or RFQ. — N/A = not applicable to this order type.

AS9100D Quality Gates — From Order to Shipment

Every Thermometrics sensor passes through documented quality checkpoints at each manufacturing stage, with records maintained per AS9100D and retrievable by job order number.

1
Order Review

Contract review, technical clarification, documentation requirements confirmed

2
Material Receiving

Incoming inspection, heat/lot verification, material certs reviewed and filed

3
Manufacturing

Controlled traveler, process documentation, in-process inspection at critical steps

4
Final Inspection

Dimensional, electrical, and calibration verification against acceptance criteria

5
Documentation & Ship

COC signed, documentation package assembled, preservation and packaging per spec

Request Your Certification Documentation

Certificate copies and full documentation packages available on request.