Thermometrics Corporation is an AS9100D and ISO 9001:2015 certified manufacturer of RTD sensors and thermocouple assemblies, headquartered in Northridge, California. For over sixty years we have supplied precision temperature measurement solutions to aerospace primes, defense contractors, industrial OEMs, and process industries worldwide — one custom sensor at a time.
Every Thermometrics sensor is manufactured in-house at our Northridge facility. No subcontracting of sensing elements or sheath fabrication — full control from raw material receipt through final inspection and calibration.
PT100, PT500, and PT1000 RTD assemblies to IEC 60751. Class AA through Class C. 2, 3, and 4-wire configurations. 304/316 SS, Inconel, and PTFE sheath options. Any insertion length.
MIMS and conventional thermocouples in Types K, J, T, N, E, R, S, B, and C. Inconel 600/625, Hastelloy C-276, and 316 SS sheaths. 0.5 mm to 12.7 mm OD. Any length, any termination.
Flat-pack, bullet, and embedded bearing RTD and TC assemblies for motor, generator, turbine, and pump bearing monitoring. 3-wire and 4-wire configurations.
Drilled-bar, fabricated, and socket-weld thermowells in 316 SS, Inconel, and Hastelloy. Tapered, straight, and stepped bore profiles. Flanged, threaded, and weld-in process connections.
Engineering-to-print from customer drawing or performance specification. Dual-element redundant assemblies, multi-point sensor arrays, and special termination configurations.
Individual calibration certificates with expanded uncertainty statements (k=2). Calibration at customer-specified setpoints from –80°C to +1300°C. AMS 2750F and pharma validation documentation.
Certificate of Conformance, material certifications with mill heat/lot numbers, NIST cal certs, first article inspection reports (FAIR), and test records — all per AS9100D QMS.
AS9100D certified quality system. AOG and expedite capability. Full material traceability. Compliant with Nadcap heat treating supplier documentation requirements.
Thermometrics Corporation operates under an AS9100D and ISO 9001:2015 certified Quality Management System — the dual certification that aerospace and precision industrial customers require. Our QMS governs every stage of manufacturing: supplier qualification, incoming material verification, in-process inspection, final test, calibration, and documentation.
Every RTD and thermocouple assembly ships with a Certificate of Conformance signed by Quality Assurance, confirming conformance to the applicable IEC standard (IEC 60751 for RTDs, IEC 60584 for thermocouples), the specified tolerance class, and all purchase order requirements. Material certifications with mill heat and lot number traceability are standard on all sheath materials.
NIST-traceable calibration certificates are available on any sensor at time of manufacture or as a standalone recalibration service. Calibration certificates include measured data at customer-specified setpoints, deviation from IEC nominal, and expanded measurement uncertainty (k=2) per the GUM (JCGM 100:2008) framework.
The aerospace industry's QMS standard, building on ISO 9001 with additional requirements for design, risk management, FOD prevention, and product traceability. Required by Boeing, Lockheed Martin, Northrop Grumman, Raytheon, and most aerospace primes.
The international standard for quality management systems. Provides the foundation for consistent product quality, continual improvement, and customer satisfaction. Recognized by industrial customers across all sectors globally.
All RTD sensors manufactured per IEC 60751:2022 — defining the Callendar-Van Dusen equation, R₀ = 100.000 Ω at 0°C, α = 3.85055×10⁻³ °C⁻¹, and Class AA through C tolerances on ITS-90.
All thermocouple assemblies manufactured per IEC 60584-1 (EMF reference functions) and IEC 60584-2 (tolerances). Class 1 and Class 2 available on all standard types.
60+ years of temperature sensor manufacturing. AS9100D quality. Same-day response on quote requests.