A practical engineering guide to selecting between RTD (PT100/PT1000) and thermocouple sensors — covering accuracy, temperature range, response time, vibration, cost, and application fit.
| Parameter | RTD (PT100 / PT1000) | Thermocouple (Types K, J, N…) |
|---|---|---|
| Operating Principle | Resistance change with temperature (IEC 60751) | Seebeck EMF voltage (IEC 60584) |
| Accuracy (typical best) | Class AA: ±0.10°C at 0°C — highest standard accuracy | Class 1: ±1.5°C (Type K) — inherently less accurate |
| Temperature Range | –200°C to +850°C (sheathed PT100) | –270°C to +1820°C depending on type; TC covers higher temps |
| Long-Term Stability | Excellent — platinum drift <0.1°C/year typical | Good to moderate — base metals drift under thermal cycling |
| Response Time | Moderate — higher thermal mass than exposed TC junction | Fast (exposed junction) — T63 <100 ms possible |
| Vibration Resistance | MIMS RTD — excellent | MIMS TC — excellent |
| Lead Resistance Effect | Must use 3 or 4-wire measurement; significant with 2-wire | No lead resistance issue — mV signal |
| Self-Heating | Yes — I²R heating; <0.1°C in still air with 1 mA | None — TC is a passive EMF source |
| Reference Junction | Not required — RTD is absolute measurement | Required — cold junction compensation (CJC) critical |
| Cost | Higher — platinum element and precision winding | Lower — base-metal alloys are inexpensive |
| Recommended for | Below 600°C where accuracy matters: pharma, food, lab, process | Above 600°C or where response speed, vibration, or cost drives |
Our applications engineers will recommend the right sensor type, tolerance class, and sheath material for your application.