(818) 886-3755 sales@thermometricscorp.com Northridge, CA — Next Day Delivery Available
AS9100DISO 9001:2015
Request a Quote (818) 886-3755
Industrial Standard · Lead Resistance Compensation · Process Control

3-Wire
RTD Configuration

Three-wire RTD configuration is the most common industrial standard for process temperature measurement. A third wire allows the transmitter or bridge circuit to compensate for lead resistance by measuring one lead and assuming all three are equal.

Technical Data

Specification Summary
Configuration3-wire — one current, one return, one compensation lead
Lead CompensationBridge-based compensation — assumes equal lead resistances
Residual ErrorZero if all 3 leads are same length and gauge; error = difference in lead R
Applicable ClassesIEC 60751 Class A, B, C (not Class AA)
Maximum Cable RunPractical to ~100 m when leads are matched and balanced
Connector TypesTerminal head, transmitter heads (DIN B), bare leads, M12
Element TypesPT100 (standard) or PT1000
Sheath Materials316 SS, 304 SS, Inconel 600, Hastelloy C-276
OD Range3.18 mm to 12.7 mm standard
DocumentationAS9100D COC standard; NIST cal on request
Technical Notes
Three-wire RTD is the dominant configuration in industrial process control, supported by virtually all DCS, PLC, and field transmitter manufacturers. The third wire allows the instrument to measure one lead resistance and subtract it from both current-carrying legs — this compensation is exact only if all three leads are the same resistance. For most installations using shielded cable run in conduit, this assumption holds well. For runs exceeding 100 m or where lead temperature varies significantly, 4-wire should be considered.

Common Applications

Industrial process control (DCS, PLC, SCADA loops)
Refinery and petrochemical process temperature
HVAC chiller, boiler, and air handler control
Pharmaceutical manufacturing process vessels
Food and beverage CIP/SIP and pasteurizer control
PT100 Resistance Tables Request a Quote

Specify Your RTD Assembly

IEC 60751 Class AA–C · MIMS · NIST Cal · AS9100D COC standard